E-MAIL: sale@ainuok.com
Whatsapp: +8618337287858
Position :
Home > Products > Industrial Dryer

Belt Dryer

The belt dryer is composed of conveying device, drying box, frame, air supply device, variable speed transmission device, dehumidification device, waste heat recovery device, electric control cabinet, vibrating screen and so on.

There are multiple sets of stainless steel mesh belts running back and forth in the drying box, and the box body is composed of metal components with built-in thermal insulation materials. The material is sent to the mesh belt on the top layer of the drying box through the conveying device, and it rotates in opposite directions. The material falls from the upper layer to the lower layer one by one, and is discharged from the discharge port by the last layer of the mesh belt.



Contact Now  to Get 4 Presents Immediately:
1. Catalogue
2. Price List
3. Technical Brochure
4. Operation Manual

Share:
Introduction

The belt dryer is a piece of continuous drying equipment for mass production. It is used for drying flake, strip, granular, and partial paste materials with good air permeability.

It is especially suitable for materials with high moisture content and heat sensitivity such as dehydrated vegetables and Chinese herbal medicine pieces. It has the advantages of a high drying rate, high evaporation intensity, and good product quality.

The belt dryer is composed of conveying device, drying box, frame, air supply device, variable speed transmission device, dehumidification device, waste heat recovery device, electric control cabinet, vibrating screen, and so on.

There are multiple sets of stainless steel mesh belts running back and forth in the drying box, and the box body is composed of metal components with built-in thermal insulation materials. The material is sent to the mesh belt on the top layer of the drying box through the conveying device, and it rotates in opposite directions. The material falls from the upper layer to the lower layer one by one and is discharged from the discharge port by the last layer of the mesh belt.

When the material to be dried is running in the box, the hot air flows through the mesh belt from top to bottom to fully contact with the material to exchange mass and heat to achieve the purpose of drying the material.

Under normal circumstances, the main body is a stainless steel mesh belt with a penetration rate of about 70%, and the hot air flow penetrates the material almost vertically, so the heat exchange is relatively sufficient.

The air medium is divided into upper, middle, and lower layers to contact the materials, and the upper layer is the high-temperature airflow in contact with the materials with high moisture content so that it can achieve the purpose of rapid dehydration;

The middle layer is a medium-temperature airflow so that the material can be dried in the later stage. After the airflow in this layer penetrates the material, the humidity of the air is quite low, so part of it is recycled and reused;

The lower layer is the room temperature airflow, penetrating the material layer not only reduces the temperature of the material but also recovers part of the heat, thereby meeting the requirements of the drying process characteristics and ensuring product quality.



Contact Now  to Get 4 Presents Immediately: 
1. Catalogue 
2. Price List 
3. Technical Brochure 
4. Operation Manual

   

Show details
Advantages
Stainless steel material, wear-resistant and corrosion-resistant
Machine size, function, material, etc. can be customized on demand
Stable conveying, simple structure, easy to maintain
Multi-layer mesh belt, high drying efficiency
The air volume, heating temperature, material residence time and feeding speed can be adjusted to achieve the ideal drying effect
The equipment configuration is flexible, and the mesh belt washing system and material cooling system can be used
Most of the air is recycled, highly energy saving
Unique air distribution device, hot air distribution is more even, to ensure the consistency of the quality of dried materials
The heat source can be matched with steam, heat transfer oil, electricity, coal-fired hot blast stove
High drying efficiency, low energy consumption, stable operation
The whole machine is easy to operate and easy to clean


Contact Now  to Get 4 Presents Immediately: 
1. Catalogue 
2. Price List 
3. Technical Brochure 
4. Operation Manual

   

 
 


                                                                                              


                                                                                              


Contact Now  to Get 4 Presents Immediately: 
1. Catalogue 
2. Price List 
3. Technical Brochure 
4. Operation Manual

   

 
 
Data parameter
MODEL DW-1.2-8 DW-1.2-10 DW-1.6-8 DW-1.6-10 DW-2-8 DW-2-10
Units(pcs) 4 5 4 5 4 5
Belt Width(m) 1.2 1.2 1.6 1.6 2 2
Length of Dryer Section(m) 8 10 8 10 8 10
Thickness of Accessories(mm) 10-80 10-80 10-80 10-80 10-80 10-80
Operating Temperature( °C ) 60-30 60-30 60-30 60-30 60-30 60-30
Steam Pressure(mpa) 0.2-0.8 0.2-0.8 0.2-0.8 0.2-0.8 0.2-0.8 0.2-0.8
Steam Consumption(kg/h) 120-300 150-375 150-375 170-740 180-500 225-600
Drying Time(h) 0.2-1.2 0.25-1.5 0.2-1.2 0.25-1.5 0.2-1.2 0.25-1.5
Dry Strength(kg h20/h) 60-160 80-220 75-220 95-250 100-260 120-300
Fan Power(kw) 9.9 12.1 9.9 12.1 18.2 22.2
Equipment Power(kw) 11.4 13.6 11.4 13.6 19.7 23.7
                                                                                          



Contact Now  to Get 4 Presents Immediately: 
1. Catalogue 
2. Price List 
3. Technical Brochure 
4. Operation Manual

   

 
Tags
Packing and shipping
After-sale service
We provide 12 months' warranty(After the warranty, we can provide life-long repair service).
Customization
Machine color, logo, design, package, carton mark, manual etc can be customized
Inspection
We set up Quality Inspection Department, and every machine will be tested before delivery.
7*24 hours support
7*24 hours online support is provided! Pls contact us if you have any problems.
sale@ainuok.com
8618337287858
x
Inquiry
If you got any questions, please do not hesitate to send us a message. We reply within 24 hours !